英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：

adjacency    
n. 邻接,邻接物,傍边

邻接,邻接物,傍边

adjacency
相邻

adjacency
相邻 邻接

adjacency
n 1: the attribute of being so near as to be touching [synonym:
{adjacency}, {contiguity}, {contiguousness}]

Adjacence \Ad"ja"cence\, Adjacency \Ad*ja"cen*cy\, [Cf. LL.
adjacentia.]
1. The state or attribute of being adjacent or contiguous;
contiguity; the attribute of being so near as to be
touching; as, the adjacency of lands or buildings.

Syn: contiguousness
[1913 Webster]

2. That which is adjacent. [R.] --Sir T. Browne.
[1913 Webster]

A relationship between two {network} devices,
e.g. {routers}, which are connected by one media segment so
that a packet sent by one can reach the other without going
through another network device. The concept of adjacency is
important in the exchange of routing information.

Adjacent {SNA} {nodes} are nodes connected to a given node
with no intervening nodes. In {DECnet} and {OSI}, adjacent
nodes share a common segment ({Ethernet}, {FDDI}, {Token
Ring}).

(1998-03-10)


请选择你想看的字典辞典：
单词字典翻译
adjacency查看　adjacency　在百度字典中的解释百度英翻中〔查看〕
adjacency查看　adjacency　在Google字典中的解释Google英翻中〔查看〕
adjacency查看　adjacency　在Yahoo字典中的解释Yahoo英翻中〔查看〕

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • Which action establishes the OSPF neighbor relationship without forming . . .
    With respect to the DROTHER routers (R1 R2), the difference between forming a full OSPF neighbor adjacency and forming a 2-WAY OSPF neighbor relationship can be seen in the below clickable image Issue the CLI command, R1# Show IP OSPF Interface Brief Notice the column labeled "Nbrs F C" with the values "2 3" Nbrs = Neighbors F = Full
  • Neighbor and adjacency in ospf? - Cisco Learning Network
    Technically, if routers are Adjacent, it means they went through all 8 neighbor states with each other, reaching the last state of FULL, where their databases are synchronized
  • OSBF neighborship adjacency - Cisco Learning Network
    Two routers to form adjacency , both must match in : 1) hello and dead interval 2) area ID 3) authentication (option) 4) flag (stub or non-stub area) If you have for example 10 routers in a network,you will have one DR and another is BDR depending on router-id values All the 10 routers will have adjacency if they match in the above four values
  • Whats the difference between an OSPF neighbourship and an adjacency?
    Adjacency is an EIGRP term, and Peer is a BGP term Expand Post Like Liked Unlike Reply 1 like luke
  • IP OSPF Flapping Adjacency - Cisco Learning Network
    Both OSPF interfaces connected to the Circuit are UP UP but one router loose's adjacency and re converges every couple of minutes No changes have been made recently and this started happening out of the blue Also full disclosure I have not run any debug commands yet (Production device debug's scares me)
  • EIGRP flapping - Cisco Learning Network
    I have an topology as the below, both router run EIGRP There is a flapping as below: Sep 10 10:48:07 528 CST: %DUAL-5-NBRCHANGE: EIGRP-IPv4 405: Neighbor 10 102 1 110 (GigabitEthernet7 39) is down: Interface PEER-TERMINATION received
  • DR BDR concept - Cisco Learning Network
    Adjacency is the next step after the neighboring process Adjacent routers are routers that go beyond the simple Hello exchange and proceed into the database exchange process In order to minimize the amount of information exchange on a particular segment, OSPF elects one router to be a designated router (DR), and one router to be a backup
  • OSPF neighbor relationship requirements - Cisco Learning Network
    The purpose to form adjacency is so that each router in that area is aware of the networks the other router is connected to Why does it need to form adjacency? So that one network subnet can access the other remote subnet routers apart dynamically, without having to set a static route to each of those networks
  • Cisco Learning Network
    To conclude, the process ID is local to the router, used internally to identify different OSPF processes that you might want to configure on a single router Two OSPF routers can form adjacency over different OSPF Process ID's You can run multiple OSPF processes on a router, using the Process ID as a distinguisher
  • OSPF Adjacency flapping over DMVPN - Cisco Learning Network
    OSPF adjacency events debugging is on *Mar 1 01:28:49 263: OSPF: Cannot see ourself in hello from 192 168 1 1 on Tunnel0, state INIT *Mar 1 01:28:49 331: OSPF: Rcv DBD from 192 168 1 1 on Tunnel0 seq 0x9AE opt 0x52 flag 0x7 len 32 mtu 1476 state INIT





中文字典-英文字典  2005-2009